Thursday, August 20, 2015

Creating an Ornament from a Stained Glass Rondel

The previous post showed the design and creation of a small window inside a front door.  The original window had a small clear glass Star of David rondel at the center.  As a small token of thanks, I offered to make the rondel into an ornament for my customers.  Here are the steps ..

Here's the original leaded glass window.  I used needle-nose pliers to pull away the old lead came from the rondel as shown.  I then gave it it a good cleaning.

Then I added 7/32" copper foil to the outer edge.  On top of that, I laid some fine gauge wire and taped it in place.  To make the hanging hook, I looped the wire twice around the barrel of a metal acid brush.

Holding the rondel carefully, I added solder to the edge, trapping both lengths of wire on top of the  foil.  I added more at the base of the loop, for strength.

 After the soldering was smoothed out, I cleaned it thoroughly and let it dry.  Then I brushed on Novacan Black Patina as shown.  After the patina set, I washed it again, let it dry, and applied Clarity Stained Glass Finishing Compound to protect the patina and to shine up the glass.

And here it is, a short time later.  A re-purposed little gem to enjoy rather than discard.
Please visit my website to see my custom windows and repairs (click here).  And if you are on FaceBook, become a fan and I'll keep you up to date on all my stained glass projects.  Call me any time at 201-600-1616 or email with your questions. Thanks!


Sunday, August 16, 2015

Custom Stained Glass Window for Door Insert

After two years with a broken front door window, my customers decided it was time to have a new one created.  We sat together and chose glass in textures and colors which complemented an existing nearby window as shown below:


I prepared three different designs and rendered them, in full color, in several combinations of the colors we decided upon.  The final choice is this one .. It uses Clear Granite glass, Mystic Purple, Turquoise and Blue opalescent glass, with a bevel cluster in the center. The bevels will catch and transmit light and loosely mimic the shape of the center of the nearby window.

When panels include bevels, they always go down onto the pattern first, since their size cannot be adjusted.

With the bevels in place, I trace them and the rest of the "cartoon" onto file folders taped side by side beneath carbon paper.  All markings and colors are transferred.

The border of the pattern is cut with regular scissors.  However, the pattern pieces are cut with specialized stained glass pattern shears as shown.  They cut a thin strip of paper between each piece.  This allows room for the copper foil which will follow.

I generally cut all of one color at the same time.  I started with the Mystic Purple glass for this project.  I've traced the square corner glass pieces as shown and am ready to trace the ovals around the bevels.

The glass is scored along the lines using an oil-filled pistol grip cutter (shown on the table).  After scoring straight lines, I use these blue "running pliers" to snap the score as shown.  For curves and smaller pieces of glass, I use metal "groziers".  (Not shown)

After several pieces of glass are cut, I grind the edges with an electric wet grinder. For this process, I wear either leather-palmed gardening gloves, or rubber fingers which are available at office supply stores.

With the purple cut, I'm moving onto the Clear Granite Glass.  Each piece is traced onto the glass as shown, then cut and grinded.  (The groziers are on the table, above the gloves).
 

Now I've cut all the glass and laid it in place on the pattern or "cartoon".  Notice that I've set up a "fence" or metal border around the panel.  This prevents the pieces from shifting.

Here I'm applying adhesive "black back" 7/32" copper foil to each piece of glass.  "Black back" foil is used when clear glass and black patina are used together.  Since the inside of the patina is black, it will effectively disappear after the solder is patina-ed.

Here I'm using a "fid" or flexible plastic wand to press the copper foil onto the glass.  This prevents liquids from seeping under the foil and allows for neater soldering lines. If there are any overlapping areas, I trim them with a razor knife.

Note that the "fence" is still in place.  All of the pieces have been foiled. 

Here I'm brushing on liquid flux which is an agent that permits the solder to gather on top of the copper foil.

This next step is called "tack soldering".  I'm applying a small dot of solder to the intersections of each glass piece as shown.

Now that the panel is tack soldered, I've removed the "fence" and I'm sliding out the "cartoon" from beneath the panel.  This is to protect it from the chemicals and liquids which follow.

Now the front of the panel has been fully soldered.

Next, the front receives a thorough cleaning with Kwik-Clean spray.

Next, my husband Eric prepares a custom cut metal frame, with mitered edges.  The frame is then held in place with push pins.

Here I've soldered the lead lines to the frame, then I've removed the pins. With the frame in place, I'm now able to fully solder the back of the panel.
 Now that both sides of the panel are soldered, I'm applying Novacan black patina to the solder using a metal acid brush.  This blue chemical reacts instantly with the solder and the zinc frame.  I let both sides dry and then I clean the whole panel again with Kwik-Clean spray.

Once the patina has set and dried, I apply Clarity Stained Glass Finishing Compound.  This is a light wax which gives the glass a nice shine and adds a protective coating to the patina.

And here is the finished panel!  We hope to install it this week, at which time I will post photos of the installation. 
 Here are a few photos of the installation, completed tonight (August 19th) ..  Here's my husband Eric taping up the window to prepare it for silicone caulk. 

In this photo, taken from the inside of the window, the textures of the various glass can readily be seen.  Note the variation in color as well.  Lighting is everything.  Colored glass is very dynamic .. It looks differently in various lighting situations and at different times of year as well!

Here's the newly installed window with the light coming from the back.  This is a more "true to life" rendition which shows the colors under ideal conditions.  Another labor of love.


Thank you Carol and Mike for your hospitality and for giving us the chance to spruce up your front door.  It was a pleasure working with you! 
 
Please visit my website to see my custom windows and repairs (click here).  And if you are on FaceBook, become a fan and I'll keep you up to date on all my stained glass projects.  Call me any time at 201-600-1616 or email with your questions. Thanks!